User Manual Power Management AC4S-GN03 (for VL-CM13 Laptop Cart)

AC4S GN03 Diagram in English

Setup steps:

Power-off to perform the following setups

Press the setting button, the digital screen starts to flash to display the current setting status, press ▲ or ▼, the digital screen displays ON, CYC or dLY.

ON: Timing Mode

In this state, press the SET button to enter the smart mode enable selection, the digital screen displays 0 to indicate that the smart mode is turned off, and the digital screen displays 1 to indicate that the smart mode is enabled, and it can be switched by pressing ▲ or ▼.

After the selection is completed, press the set button to enter the time setting, and increase or decrease the time by pressing the ▲ or ▼ button. The setting range is 000-999 minutes. When the time is set to 000, the timer works in the long power supply mode.

CYC: Cycle Mode

In this state, press the SET button to enter the cycle mode setting, and press ▲ or ▼ to select the cycle mode.

0 means full cycle; 2 means AB group cycle, output sockets 1 and 2 are group A, 3 and 4 are group B; 3 indicates that the output sockets 1, 2, and 3 cycle, and socket 4 is long-term power supply at this time. Refer to above diagram.

After the setting is completed, press the setting button to enter the cycle interval time setting, and press the button ▲ or ▼ to increase or decrease the cycle interval time. The setting range is 01-99 minutes.

dLY: Delayed Power-On Function

Delayed Power-On means that after pressing the power-on button, it will be turned on after a few hours of delay.

In this state, press the SET button to enter the delayed power-on time setting, and press ▲ or ▼ to increase or decrease the delayed time, the setting range is 0-99 hours, 0 means to disable the delayed power-on function.

After the setting is completed, press the setting button, the digital screen stops flashing, and the setting is completed.

For example, if you come to work in the morning and don’t want to charge the tablet, but want to charge it in the afternoon, go to setting to set the dLY function to 10 hours, then the device will start charging after 10 hours, and it will be the afternoon.

Gebiz mall logo

We are available in Gebiz Mall

Registered Government Trading Partner 

Main Menu